|
|
The attractive high performance Waterhog Eco Elite Fashion combines the performance
features and unique herringbone face pattern of the Waterhog Eco Elite mat and adds an
attractive fabric border made of the same green friendly100% post consumer recycled
P.E.T. polyester fiber system that is reclaimed from plastic bottles. The result is a
beautiful look that's easy to maintain - perfect for more decorative areas like offices,
restaurants, retail stores. WaterHog Eco Premier Fashion mats have a100% rubber backing
that contains 15% to 20% post consumer recycled car tire rubber. Each WaterHog Eco Elite
Fashion mat has the universal recycle system molded to the face to promote recycling and
has a recycle content label on back.
Certified slip-resistant by the National Floor Safety Institute.
|
WaterHog ECO Elite Fashion Mats
Photos:
1
2
3
WaterHog ECO Elite Fashion Mats
Photos:
1
2
3
WaterHog ECO Elite Fashion Mats
Photos:
1
2
3
|
|
Colors
|
Specifications
|
Cleaning Instructions
|
|
|
|
Colors
|
Specifications
|
Cleaning Instructions
|
GENERAL SPECIFICATIONS:
| SURFACE |
|
| FIBER TYPE: |
Solution-dyed 100% Post Consumer Recycled PET Polyester, recycled from soda bottles |
| WEIGHT: |
30 ozs./sy. |
| NUB HEIGHT: |
3/8" |
| DESIGN: |
Herringbone |
| BACKING |
|
| TYPE: |
100% SBR Rubber (15% Post Consumer Recycled Rubber from Tires) |
| THICKNESS: |
.160" - Border
.190" - Nubs
.050" - Between Nubs
|
| DUROMETER: |
60 |
| TENSIL: |
1100 PSI |
|
FEATURES |
| 1. |
Reinforced face NUBS: Face NUBS are reinforced with rubber to resist
crushing, maintaining high performance and extending product life.
|
| 2. |
"Water Dam" border: Border is designed to hold water and dirt on mat
to minimize slip hazards and floor damage around perimeter of the mat.
|
| 3. |
Raised NUB surface: Removes and traps dirt and moisture and holds
it on mat below shoe level so it is not tracked in.
|
| 4. |
TriGrip backing: Gripping action minimizes movement on most carpets.
|
| 5. |
Rubber backing: Lays flat, won’t crack or curl like vinyl mats. |
| 6. |
Indoor/Outdoor: Durable PET polyester face suitable for indoor or outdoor use.
100% recycled PET polyester fiber system dries quickly preventing fading and rotting.
|
| 7. |
Easy to clean: Just vacuum or hose off and hang to dry. |
| 8. |
Colorfast: Solution dyed for excellent light and wet fastness. |
| 9. |
Not adversely effected by salt or ice melt. |
| 10. |
Should not be used in areas exposed to animal fats (kitchens) or petroleum products. |
| 11. |
Passes Flammability Standard DOC-FF-1-70 |
|
|
Colors
|
Specifications
|
Cleaning Instructions
|
MAINTENANCE RECOMMENDATIONS FOR ANDERSEN MATS
| 1. Vacuum Daily |
|
When possible, Waterhog mats should be vacuumed on a daily basis.
During periods of inclement weather, use of a wet/dry vacuum may
provide a more effective method of daily maintenance.
|
| 2. Routine Maintenance |
|
Spots and non-permanent stains should be removed as needed using a safe
non-organic solvent based cleaner. In the event a solvent based spotter
is needed, caution should be taken to rinse the excess solvent thoroughly
before returning the mat to service. Failure to rinse the solvent can
result in damage to the rubber backing of the mat. Periodically, as
needed, Waterhog mats should be cleaned using a more vigorous method such
as a pressure washer or water hose. Following the use of this method,
the mats should be placed in a position to allow them to drain. This
draining will occur rapidly and the mats will be ready to put back into
service in a short time.
|
| 3. Deep Cleaning |
|
Waterhog mats may be cleaned by any routine method used for carpeted floors.
This includes wet extraction as well as low moisture extraction methods.
Chemicals used for cleaning should be as solvent-free as possible and
following a wet cleaning, care should be taken to rinse the mat as thoroughly
as possible. If a wet system is used, the mats should be placed in a
position to drain as much as possible before returning to service.
|
| 4. Floor Preparation |
|
Prior to the mat being put back into service, Andersen recommends that the
floor where the mat will be placed be cleaned to remove dust and dirt. This
will allow the mat to grip the floor more effectively reducing mat movement
with traffic.
|
|
|
|
|