|
|
Products Detail: WaterHog Fashion
|
No other mat in the industry traps water and dirt so effectively. WaterHog mats
are constructed of rubber reinforced face nubs and the “waffle” design provides
crush proof scraping action. Raised, “Water Dam” borders trap dirt and water
keeping floors cleaner and safer. These mats are perfect indoors or out, especially
outside your front door. The border for WaterHog Fashion features the same 100%
polypropylene fiber system as the mat surface.
|
WaterHog Fashion Mats
Photos: 1
2
3
WaterHog Fashion Mats
Photos:
1
2
3
WaterHog Fashion Mats
Photos:
1
2
3
|
|
Colors |
Specifications
|
Cleaning
Instructions
|
GENERAL SPECIFICATIONS:
|
SURFACE |
|
|
FIBER TYPE: |
Needlepucnhed Solution-dyed polypropylene, outstanding light fastness.
|
|
WEIGHT: |
24 oz. per square yard (884 grams per square meter) |
|
NUB HEIGHT: |
1/4" |
|
DESIGN: |
Square "waffle" |
|
BACKING |
|
|
TYPE: |
100% SBR Rubber (20% Recycled Content) |
|
THICKNESS: |
.190" - Nubs
.050" - Between Nubs
.110" - Border |
|
DUROMETER: |
60 |
|
TENSIL: |
1400 PSI |
|
TESTING |
|
|
|
Passes Flammability Standard DOC-FF-1-70 |
|
|
ASTM C 1028-29 Static Coefficient of Friction. Dry .70 |
|
|
Anti-Static rating averaging 1.2 KV with a maximum average voltage of 1.63 KV as measured by the AATCC 134 Electrostatic Propensity Test and meets IBM’s minimum standard for electrical resistance (NFPA99). |
|
|
FEATURES |
|
1. |
Premium 24 oz/sq. anti-static Polypropylene fiber system dries quickly and won’t fade or rot. When wet, the rubber reinforce surface allows water to be wicked to the bottom of the mat away from foot traffic while providing a slip resistant surface. |
|
2. |
Polypropylene fiber system dries quickly and is suitable for indoor or outdoor use.
|
|
3. |
Colorfast: Solution dyed for excellent light and we fastness. |
|
4. |
Unique ridged construction effectively stores dirt and moisture beneath shoe level. |
|
5. |
Exclusive “Water Dam” border keeps dirt and water in the amt and off the floor, minimizing slip hazards and floor damage. |
|
6. |
Green friendly rubber backing has 20% recycled rubber content and is available in smooth or cleated types. |
|
7. |
Exclusive rubber reinforced face nubs prevent pile from crushing in high traffic areas, thereby maintaining high performance and extending product life. |
|
8. |
Should not be used in areas exposed to animal fats (kitchens) or petroleum products. |
|
9. |
Not adversely affected by salt or ice melt. |
|
10. |
Certified slip-resistant by the National Floor Safety Institute. |
|
11. |
Recommended uses computer rooms, around electronic equipment, malls, banks, hotels, offices, restaurants, healthcare, supermarkets and more.
|
|
12. |
Anti-static |
|
13. |
Highly durable and attractive fashion border makes it the perfect choice for indoor or outdoor applications.
|
|
14. |
Sizes: 18” x 27” 2’x 3’ 3’ x 4’ 3’ x 5’ 3’ x 8’ 3’ x 10’ 3’ x 12’ 3’ x 16’ 3’ x 20’ 4’ x 6’ 4’ x 8’ 4’ x 10’ 4’ x 12’ 4’ x 16’ 4’ x 20’ 6’ x 6’
6’ x 8’ 6’ x 12’ 6’ x 16’ 6’ x 20’ Lengths up to 60’ long
|
|
|
Colors |
Specifications
|
Cleaning Instructions
|
MAINTENANCE RECOMMENDATIONS FOR ANDERSEN MATS
|
1. Vacuum Daily |
| When possible, Waterhog mats should be vacuumed on a daily basis.
During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
|
|
2. Routine Maintenance |
| Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner.
In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly
before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat.
Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer
or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain.
This draining will occur rapidly and the mats will be ready to put back into service in a short time.
|
|
3. Deep Cleaning |
| Waterhog mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as
low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet
cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be
placed in a position to drain as much as possible before returning to service.
|
|
4. Floor Preparation |
| Prior to the mat being put back into service, Andersen recommends that the floor where the mat will be placed be cleaned
to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.
|
|
|
|
|