|
|
Products Detail: ColorStar Computuft
|
No set up charge! Fast Service!
Anti-Static mats are guaranteed against color loss for 10 years.
20% Recycled Content.
Logos can be designed using up to six of the twenty available colors.
State-of-the-art computerized tufting and 26 oz square yard UV-stable nylon produces
long-lasting, beautiful graphic logos.
Available in smooth or cleated backing types.
LUTRADUR™ substrate creates a strong bond between the rubber and the carpet.
All ColorStar™ Computuft mats are certified slip resistant by the National
Floor Safety Institute.
|
ColorStar™ Computuft
Photos: 1
2
3
ColorStar™ Computuft
Photos:
1
2
3
ColorStar™ Computuft
Photos:
1
2
3
|
|
Colors
|
Specifications
|
Cleaning Instructions
|
GENERAL SPECIFICATIONS:
|
SURFACE |
|
|
FIBER TYPE: |
Solution-dyed BCF nylon, 4x4 twist, 2 ply twist heat set |
|
HEIGHT: |
7/16 in. |
|
WEIGHT: |
5/32" |
|
CONSTRUCTION: |
Cut Pile |
|
BACKING |
|
|
PRIMARY: |
Non-woven Polyester |
|
SECONDARY: |
100% SBR Rubber
Thickness: .060"
Durometer: 65
Tensil 1800 PSI
|
|
TESTING |
|
|
|
Passes Flammability Standard DOC-FF-1-70 |
|
|
Passes AATCC Test Method 134-1991 Electrostatic Propensity of Carpets Maximum Voltage negative 1.0 KV |
|
|
FEATURES |
|
1. |
No set up charges! Fast Service! |
|
2. |
Anti-Static mats are guaranteed against color loss for 10 years when used indoors. |
|
3. |
Logos can be designed using up to six of the twenty available colors. |
|
4. |
State-of-the-art computerized tufting and 26 oz. square yard UV-Stable nylon produces long-lasting beautiful graphic logos. |
|
5. |
Available in smooth or cleated backing types. |
|
6. |
Sizes: 2’x 3’ 3’ x 4’ 3’ x 5’ 3’ x 10’ 4’ x 6’ 4’ x 8’ 4’ x 10’ 5’ x 8’
5’ x 10’ 6’ x 10’ 6’ x 12’
|
|
7. |
Lengths up to 40’ long |
|
8. |
Certified slip-resistant by the National Floor Safety Institute. |
|
9. |
Recommended uses malls, banks, hotels, offices, restaurants, and more. |
|
|
Colors |
Specifications
|
Cleaning Instructions
|
MAINTENANCE RECOMMENDATIONS FOR ANDERSEN MATS
|
1. Vacuum Daily |
| Interior mats are constructed with either nylon or olefin surfaces designed to wipe residual soil, dust and moisture from shoes.
They are most effective when used in conjunction with high performance entrance mats.
They should be vacuumed daily using either a dry or wet/dry vacuum.
|
|
2. Routine Maintenance |
| As needed, interior mats should be cleaned and/or spot cleaned using a neutral cleaner followed by rinsing.
If the mat becomes wet during the cleaning process, it should be allowed to dry thoroughly before returning to service.
Nylon mats will require a longer drying period and should be positioned where they can drain during the drying process.
|
|
3. Deep Cleaning |
| Interior mats can be deep cleaned using any method used for carpeted floors.
Andersen recommends using a neutral, solvent free cleaner if possible.
In the event a solvent is used for removing oil, grease, or gum type spots, take care to thoroughly rinse the solvent
from the mat before it is allowed to dry for return to service.
|
|
4. Floor Preparation |
| As with entrance mats, prior to the mat being put back into service, Andersen recommends that the floor where
the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more
effectively reducing mat movement with traffic.
|
|
|
|
|