|
|
|
Multi-color images are created by molding a digitally printed polymeric material into a durable nitrile rubber.
Unlimited color options available. Photo-realistic images, printed ready artwork, tones and shades are all produced with unparalleled detail and clarity. You may also select from our standard palette featuring 25 vibrant colors.
Impervious to sunlight, these long lasting logo mats perform beautifully in all types of environments.
Resistant to oils and chemicals.
Suitable for indoor or outdoor use, the high-traction surface effectively removes and traps tough dirt, grime, and water from shoes.
|
SuperScrape™ Impressions
Photos: 1
2
3
SuperScrape™ Impressions
Photos:
1
2
3
SuperScrape™ Impressions
Photos:
1
2
3
|
|
Colors
|
Specifications
|
Cleaning Instructions
|
GENERAL SPECIFICATIONS:
|
SURFACE |
|
|
RUBBER TYPE: |
100% Nitrile Rubber (20% Recycled Content) |
|
NUB DESIGN: |
Oblong |
|
COLOR: |
Black |
|
THICKNESS: |
.138" |
|
DUROMETER: |
65 |
|
TESTING |
|
|
|
Passes Flammability Standard DOC-FF-1-70 |
|
|
UV Stable |
|
|
Static Decay Test Method 4046 Federal Standard 101B/NFPA 99 Chapter 12 Section 4.1.3.8 (f) (3) (i)
Maximum Time Recorded: 01 seconds.
|
|
|
Anti-Static: ANSI/ESD 57-1 1994 Protection of Electrostatic Discharge of Susceptible Items |
|
|
Flooring Materials: |
|
|
Surface to Ground- 2.9 x 10^8 ohms @ 50% Relative Humidity |
|
|
Surface to Ground- 3.0 x 10^8 ohms @ 12% Relative Humidity |
|
|
Surface to Surface- 6.4 x 10^8 ohms @ 50% Relative Humidity |
|
|
Surface to Surface- 6.7 x 10^8 ohms @ 12% Relative Humidity |
|
|
FEATURES |
|
1. |
No set up charges! Fast Service! |
|
2. |
All rubber logo mat, images are permanently molded into the mat. |
|
3. |
7 colors available. Place up to 5 colors per mat on a black all-rubber base. |
|
4. |
Durable 100% Nitrile Rubber mat provides a slip-resistant surface. |
|
5. |
Molded tread-surface face cleats effectively scrape tough dirt and grime off shoes. |
|
6. |
Heavy weight keeps mat in place. |
|
7. |
Slip resistant surface. |
|
8. |
Welding Safe. |
|
9. |
Nitrile Rubber construction allows for use in environments that are exposed to animal fats and petroleum products. |
|
10. |
Sizes: 2 1/2’ x 3’ 3’x 5’ 3’ x 10’ 4’ x 6’ |
|
11. |
Recommended for outside entrance, restaurants, healthcare and educational facilities. |
|
|
Colors |
Specifications
|
Cleaning Instructions
|
MAINTENANCE RECOMMENDATIONS FOR ANDERSEN MATS
|
1. Vacuum Daily |
| Interior mats are constructed with either nylon or olefin surfaces designed to wipe residual soil, dust and moisture from shoes.
They are most effective when used in conjunction with high performance entrance mats.
They should be vacuumed daily using either a dry or wet/dry vacuum.
|
|
2. Routine Maintenance |
| As needed, interior mats should be cleaned and/or spot cleaned using a neutral cleaner followed by rinsing.
If the mat becomes wet during the cleaning process, it should be allowed to dry thoroughly before returning to service.
Nylon mats will require a longer drying period and should be positioned where they can drain during the drying process.
|
|
3. Deep Cleaning |
| Interior mats can be deep cleaned using any method used for carpeted floors.
Andersen recommends using a neutral, solvent free cleaner if possible.
In the event a solvent is used for removing oil, grease, or gum type spots, take care to thoroughly rinse the solvent
from the mat before it is allowed to dry for return to service.
|
|
4. Floor Preparation |
| As with entrance mats, prior to the mat being put back into service, Andersen recommends that the floor where
the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more
effectively reducing mat movement with traffic.
|
|
|
|
|