|
|
Products Detail: Waterhog™ Impressions
|
No set up charge! Fast Service!
Printed on Andersen's State of the Art Digital Printer.
Made with 25% recycled content.
18 colors available. Place up to 5 colors per mat.
Excellent durability and traction properties.
Provides a slip-resistant surface which effectively removes tough dirt, grime and
water from feet. Green friendly rubber backing has 20% recycled rubber content.
Available in smooth and cleated backing types.
All Waterhog™ Impressions mats are certified slip resistant by the National
Floor Safety Institute.
|
WaterHog™ Impressions
Photos: 1
2
3
WaterHog™ Impressions
Photos:
1
2
3
WaterHog™ Impressions
Photos:
1
2
3
|
|
Colors
|
Specifications
|
Cleaning Instructions
|
GENERAL SPECIFICATIONS:
|
MAT THICKNESS |
|
|
OVERALL MAT THICKNESS: |
3/8" |
|
SURFACE |
|
|
TYPE: |
Nylon |
|
WEIGHT: |
28 oz. per square yard (884 grams per square meter) |
|
NUB HEIGHT: |
1/4" |
|
DESIGN: |
Square "waffle" |
|
BACKING |
|
|
TYPE: |
100% SBR Rubber (25% Recycled Content) |
|
THICKNESS: |
.190" - Nubs
.050" - Between Nubs |
|
DUROMETER: |
60 |
|
TENSIL: |
1400 PSI |
|
TESTING |
|
|
|
Passes Flammability Standard DOC-FF-1-70 |
|
|
ASTM C 1028-29 Static Coefficient of Friction. Dry . |
|
|
FEATURES |
|
1. |
NO ART CHARGES! |
|
2. |
NO SETUP CHARGE!
|
|
3. |
Orders ship on an average of 7 working days from time of final approval. |
|
4. |
Versatile Printed logos with Waterhog Performance! |
|
5. |
Choice of 17 colors and over 800,000 designs available for viewing |
|
6. |
3-D images and phase-in colors |
|
7. |
Fabric covered borders for the ultimate in fashion. |
|
8. |
Durable nylon face suitable for indoor or outdoor use. |
|
9. |
Premium 100% rubber backing. |
|
10. |
“Water Dam” border: Border is designed to hold water and dirt on mat keeping them off carpets and floors. Unique raised fabric border allows Fashion mats to hold up to 1 ½ gallons of water per square yard. Some styles available without dam for outside use, so water can drain easily.
|
|
11. |
Raised NUB surface: Removes and traps dirt and moisture and holds it on mat below shoe level so it is not tracked in.
|
|
12. |
Reinforced face NUBS: Face NUBS are reinforced with rubber to resist crushing, maintaining high performance and extending product life.
|
|
13. |
Easy to clean: Just vacuum or hose off and hang to dry.
|
|
14. |
Colorfast: Solution dyed for excellent light and wet fastness
|
|
15. |
Not adversely effected by salt or ice melt.
|
|
16. |
Should not be used in areas exposed to animal fats (kitchens) or petroleum products.
|
|
17. |
Sizes: 2’x 3’ 3’ x 4’ 3 x 5 ’ 3’ x 10’ 4’x 6’ 4’ x 8’
4’x 10’ 6’ x 8’ 6’ x 12’
|
|
18. |
Certified slip-resistant by the National Floor Safety Institute.
|
|
19. |
Recommended uses: real estate companies, apartment communities, large corporate accounts, retail establishments.
|
|
|
Colors |
Specifications
|
Cleaning Instructions
|
MAINTENANCE RECOMMENDATIONS FOR ANDERSEN MATS
|
1. Vacuum Daily |
| When possible, Waterhog mats should be vacuumed on a daily basis.
During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
|
|
2. Routine Maintenance |
| Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner.
In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly
before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat.
Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer
or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain.
This draining will occur rapidly and the mats will be ready to put back into service in a short time.
|
|
3. Deep Cleaning |
| Waterhog mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as
low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet
cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be
placed in a position to drain as much as possible before returning to service.
|
|
4. Floor Preparation |
| Prior to the mat being put back into service, Andersen recommends that the floor where the mat will be placed be cleaned
to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.
|
|
|
|
|