|
|
Traction Tread
|
Slip-resistant floor protetction matting made from chemical-resistant 100% Nitrile
rubber. Traction Tread rubber runners are UV protected, anti-static and ideal for
numerous production locations, walkways, gym floor protection, parts counters, lab
areas and food service applications.
|
Traction Tread Mats
Photos: 1
2
3
Traction Tread Mats
Photos:
1
2
3
Traction Tread Soft Mats
Photos:
1
2
3
|
|
Colors
|
Specifications
|
Cleaning Instructions
|
GENERAL SPECIFICATIONS:
|
OVERALL MAT THICKNESS |
1/8"
|
|
SURFACE |
|
RUBBER TYPE: |
100% Nitrile Rubber (20% Recycled Rubber Content) |
|
THICKNESS: |
1/8" |
|
DUROMETER: |
65 |
|
TENSIL: |
1100 PSI |
NUD DESIGN: |
Diamond |
|
TESTING |
|
|
|
Passes Flammability Standard DOC-FF-1-70 |
|
|
UV Stable |
|
|
Slip Resistant Surface: ASTM C10280-96 Dry- .92 Wet- .86 |
|
|
Anti-Static: ANSI/ESD 57-1 1994 Protection of Electrostatic Discharge of Susceptible Items: |
|
|
Static Decay Test Method 4046 Federal Standard 101B/NFPA 99 12-4.1.3.8 (f)(3)(i) – Maximum Time Recorded: .91 sec. |
|
|
Anti-Static: ANSI/ESD 57-1 1994 Protection of Electrostatic Discharge of Susceptible Items:
Flooring Materials
Surface to Ground - 2.9 x 10^8 ohms @ 50% Relative Humidity
Surface to Ground - 3.0 x 10^8 ohms @ 12% Relative Humidity
Surface to Surface - 6.4 x 10^8 ohms @ 50% Relative Humidity
Surface to Surface - 6.7 x 10^8 ohms @ 12% Relative Humidity |
|
|
FEATURES |
|
1. |
Ideal for use as a floor protector. |
|
2. |
Molded Rubber pattern on face provides traction under wet conditions |
|
3. |
Nitrile rubber construction allows for use in environments that are exposed to animal fats and petroleum products. |
|
4. |
Welding Safe |
|
5. |
Rubber runners are UV protected |
|
6. |
Anti-static |
|
7. |
Heavy weight keeps mat in place. |
|
8. |
Sizes: 33” x 40’ 44” x 40’ 58” x 40’ |
|
9. |
Certified slip-resistant by the National Floor Safety Institute. |
|
10. |
Recommended uses: Kitchens, gym floors and wet areas, walkways, parts counters, lab areas, and food service applications. |
|
|
Colors |
Specifications
|
Cleaning Instructions
|
MAINTENANCE RECOMMENDATIONS FOR ANDERSEN MATS
|
1. Daily Cleaning |
| Anti-fatigue mats should be cleaned daily by sweeping or brushing to remove loose soil and debris.
These impurities can cause excessive wear on the surface of the mats and shorten product life.
The floor under the mats should also be kept as clean and dry as possible to protect the bottom of the mats and reduce mat movement.
|
|
2. Routine Cleaning |
| On a regular basis, anti-fatigue mats should be cleaned with water-based cleaners to remove oil and grease where needed.
We do not recommend the use of solvent-based cleaners. It is important to use cleaners strong enough with proper agitation
to remove fats and other food related oils. Research has shown that even grease-proof rubber can be affected by grease and
oil if the grease and oil are allowed to remain in contact with the mat for extended periods of time. Andersen recommends
thorough cleaning at least weekly to avoid prolonged contact of grease with the rubber.
|
|
|
|
|