|
|
PRODUCT HAS BEEN REPLACED WITH WaterHog Eco Premier Tile
|
Waterhog Premier Tile has a 50% heavier face yarn than Waterhog Classic Tile, which
makes it ideal for use in the most demanding applications. It is available in three
patterns: Waterhog Premier Diagonal, Diamond and Geometric Tile. These tiles are
suitable for high-traffic areas such as hospitals, grocery stores, airports, retail
stores, schools, hotels and any other commercial buildings.
|
WaterHog Premier Tile Mats
Photos: 1
2
3
WaterHog Premier Tile Mats
Photos:
1
2
3
WaterHog Premier Tile Mats
Photos:
1
2
3
|
|
Colors |
Specifications
|
Cleaning
Instructions
|
GENERAL SPECIFICATIONS:
|
MAT THICKNESS |
|
|
SURFACE |
|
|
FIBER TYPE: |
Needlepunched Solution-dyed polypropylene with 18, 60, and 110 denier fibers.
|
|
WEIGHT: |
36 ozs./sy. |
|
NUB HEIGHT: |
1/4" & 7/16" |
|
DESIGN: |
Diamond, Diagonal, Geometric |
|
BACKING |
|
|
TYPE: |
100% SBR Rubber |
|
THICKNESS: |
.190" - Nubs
.050" - Between Nubs
|
|
DUROMETER: |
75 |
|
TENSIL: |
1100 PSI |
|
TESTING |
|
|
|
Passes Flammability Standard DOC-FF-1-70 |
|
|
Dimensional Stability AACHENER test: less than 0.2% change. |
|
|
Anti-Static maximum average voltage of 1.6 KV as measured by the AATCC 134 Electrostatic Propensity Test and meets IBM’s minimum standard for electrical resistance (NFPA99). |
|
|
ASTM C 1028-29 Static Coefficient of Friction. Dry .70 |
|
|
FEATURES |
|
1. |
Anti-Static 100% premium polypropylene fiber system dries quickly and won’t fade or rot. When wet, the rubber-reinforced surface allows water to be wicked to the bottom of the mat, below foot traffic and providing a slip-resistant surface. |
|
2. |
Colorfast: Solution dyed for excellent light and we fastness.
|
|
3. |
Unique ridged construction effectively stores dirt and moisture beneath shoe level. |
|
4. |
Damaged or worn tiles can be replaced easily. |
|
5. |
Install with solvent-free permanent adhesive. |
|
6. |
Exclusive rubber reinforced face nubs prevent pile from crushing in high traffic areas, thereby maintaining high performance and extending product life. |
|
7. |
Should not be in areas exposed to animal fats (kitchens) or petroleum products. |
|
8. |
Not adversely affected by salt or ice melt. |
|
9. |
Certified slip-resistant by the National Floor Safety Institute. |
|
10. |
Recommended uses airports, retail stores, banks, hotels, offices, restaurants, healthcare, supermarkets and other commercial buildings.
|
|
12. |
Size: 18” x 18” |
|
|
Colors |
Specifications
|
Cleaning Instructions
|
MAINTENANCE RECOMMENDATIONS FOR ANDERSEN MATS
|
1. Vacuum Daily |
| When possible, Waterhog mats should be vacuumed on a daily basis.
During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
|
|
2. Routine Maintenance |
| Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner.
In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly
before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat.
Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer
or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain.
This draining will occur rapidly and the mats will be ready to put back into service in a short time.
|
|
3. Deep Cleaning |
| Waterhog mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as
low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet
cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be
placed in a position to drain as much as possible before returning to service.
|
|
4. Floor Preparation |
| Prior to the mat being put back into service, Andersen recommends that the floor where the mat will be placed be cleaned
to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.
|
|
|
|
|